BU SINAV ICIN TAVSIYE EDILEN PUANLAMA % 80 ' DIR
Basarilar Dileriz.................
1) You are brought in as a consultant to set up TCP/IP on a network of Microsoft Windows-based computers. The network is comprised of five subnets, each with its own domain controller. Every host must be able to browse every other computer and perform peer-to-peer connections. The network must also register and resolve computer names automatically through a central database. What is the best choice to install on the network?
2) there was an exhibit with a picture of a network with 2 subnets each subnet had a number of printers workstations and one server each. You have a workstation in subnet A on this workstation u can map a drive to serverB on subnet B with no problems, However you cannot connect to serverA on subnet A. Why not ?
3) Two DNS servers. You plan to install a third DNS server which will be used to resolve DNS queries for resource that are located on the internet.
4) I had a question where there was a an exhibit of the output from ipconfig all. You had to work out what kind of resolution was being used from the given information. Output of ipconfig all Ip address 149.69.69.69 Wins server 149.69.69.100 DNS server address 149.69.69.102 Default gateway 149.69.69.2 Sunnet mask 255.255.0.0 Wins to use DNS resolution : NO Node type : H There was a lot more info but i cant remember the parameters not important anyway for this quetsion. Which resolution methods are being used? One answer only.
5) Suppose the following situation exists: Karen wants to install a Windows NT Server computer with four network adapter cards on her TCP/IP network. This server will act as a router. Required result: The server must route TCP/IP packets. Optional desired results: The server should dynamically update its routing tables when other routers are added to or removed from the network. The server should provide IP addresses to every client computer on each subnet. The server should send trap messages across the network to a UNIX server. Proposed solution: Assign one IP address to each network adapter card on the server. Install WINS services on the server. Install DHCP services on the server. Create one scope for each subnet. Install the SNMP services on the server. Set up SNMP to forward trap messages to the UNIX server. Which results does the proposed solution produce?
6) Fred manages a network that is comprised of four Windows NT Server computers, 80 Windows NT Workstation computers, 100 Windows 95 computers and eleven UNIX computers. Because his company frequently reorganizes, Fred often finds himself physically moving computers from one subnet to another. Only the UNIX computers never move. TCP/IP is the network's primary protocol. The UNIX computers have no hostnames that are longer than fifteen characters, and each hostname contains only alphanumeric characters. One of the Windows NT Server computers runs DHCP with one scope configured for each subnet. All of the Windows-based computers are set up as DHCP clients. Required results: Every Windows-based computer on each subnet must be able to access the Windows NT Server computers by computer name. Every Windows-based computer on each subnet must also be able to receive its IP addresses from the DHCP server. Optional desired results: All UNIX systems should access by hostname any Windows NT Server computer that is set up as an FTP server. All Windows-based computers should access by hostname any UNIX computer that is set up as a Telnet or FTP server. Proposed solution: Set up the network routers to forward DHCP broadcasts to all subnets. Install a WINS Server on the network. Set up the DHCP server to supply all DHCP clients with the IP address of the WINS server. On the DHCP server, exclude the IP addresses of the UNIX computers from the scopes. Create a client reservation for the IP address of the WINS server. On each one of the windows machines create a HOSTS file with entries for all the UNIX machines. Which results does the proposed solution produce?
7) Martha administers a TCP/IP network that is comprised of six Windows NT Server computers, 17 UNIX computers and 350 Windows NT Workstation computers. The workstations are set up as both DHCP clients and WINS clients. Martha installs the Microsoft DNS Server service on one of the Windows NT Server computers. The UNIX computers will use the DNS server for hostname resolution. The computer names and IP addresses of the UNIX computers have been entered into the DNS server database. How can Martha manage hostname resolution with the least administrative effort?
8) You FTP to a remote server called TESTSERVER using FTP TESTSERVER you are successful. When you use the command line FTP 149.76.123.123 you fail to connect. The HOSTS file on your machine contains the following entries. 149.176.3.12 FTP1 149.76.123.123 TESTSERVER 149.6.13.23 FTP2 149.23.3.12 FTP3 What is the problem ? One answer only.
9) From your NT workstation you can connect to a remote server by specifying the's UNC path in Windows explorer, but when you try to connect through ftp 199.34.23.100, you can't. What is the problem?
10) Your network consist of 7 subnets. One subnet have a PDC and the rest each a BDC or a server. You want all clients to be able to connect to all servers on the network, but you don't want broadcast. How will you configure the network for best performance?
11) Your company has a NT server set as RAS. The server is connect to the internet. Some users want to use laptops to connect to the server in order to access the company's resource when they are travelling. These users connect to the internet through the ISP. Which protocol should you use?
12) You are configuring a IIS server on NT Server which is going to be used as a FTP Server and also a WWW Server. How will you configure it for the Host record?
13) You plan a internetwork. How will you dertermine the amount of host ID's you will need?
14) What is the utility to view who are all currently having TCP/IP connection with your Workstation?
15) What is the utility to view what configuration changes the DHCP made at your workstation Configuration?
16) What do you use to find the path a packet takes?
17) Your company network includes several UNIX computers that are running the rexecd daemon. You want to execute a command on one of the UNIX computers from your Windows NT computer. Which utility must you use?
18) Three UNIX machines are to be stored in the WINS Database manually and what entry will you put at the WINS configuration panel?
19) You have 1 DNS Server. You want to minimize static entries by using WINS to resolve FQDN for non-Microsoft Clients.How ?
20) You are troubleshooting a Windows NT Server computer running TCP/IP. The server is on subnet 143.170.21.0. Users on a remote subnet cannot access the server. When you run IPCONFIG /ALL, you get the results displayed in the exhibit. Windows NT IP Configuration Host Name - workstation1 DNS Servers - Node Type - Hybrid NetBios Scope ID - IP Routing Enabled - No WINS Proxy Enabled - No Ethernet Adapter PLKN13 Physical Address - 00-20-36-12-A5-E3 DHCP Enabled - No IP Address - 143.170.21.204 Subnet Mask - 255.255.0.0 Default Gateway - 143.170.21.1 Primary WINS Server - 143.170.21.51 What is the most likely the cause of the problem?
21) Which file does a DNS root server use to connect to the Internet?
22) You install DNS on a NT server and now need to add a resource for the domain mail server. Which resource record must you add?
23) You have a Ras server connected to the Internet. Remote users use DUN to connect to the Ras server through a local ISP. You need to provide security so that remote users can access your network using only Point-to-Point Tunnelling Protocol (PPTP). How should you set up the Ras server?
24) One application server IP: 192.168.50.10, another application server IP: 192.168.50.8. Now you want to place both on ONE server. How?
25) A Windows 95 user complains that she cannot connect to any computers on her local subnet even when using their IP addresses. Seated at her computer, you ping 127.0.0.1 and receive a reply. Other users on her subnet do not report having any trouble. All client computers on the network are WINS- enabled. What is the most probable cause of the problem in windows 95?
26) A computer named WKsta1 on subnet A cannot connect to a WinNTserver on subnet B by running the command net use f: \\factory\data When other client computers on subnet A run that command, they connect to the server. WKsta1 can ping the server by IP address. What is problem ?
27) You are using a WinNT w/s on TCP/IP network. When you run the command ftp 131.107.3.4 , you connect to a WinNT server computer on a different subnet. However, when you use Windows NT Explorer and specify the UNC path of that server, you fail to connect. What is problem ?
28) Network has 3 subnets. A single domain for all people. Subnet A has a PDC, Subnet B has BDC, and Subnet C has 35 NT workstation. No WINS. You want to configure the Network, so that all workstation can log on domain. What must do ?
29) You want a WINS Client Workstation in Subnet A to browse and communicate with the another workstation in Subnet B. But it can't,even though the other subnet has their own WINS Server installed. What could you do?
This test has been created using the CASTLE Toolkit