1) Which control panel applet is used to configure modems?

   A. Modem applet

   B. Devices applet

   C. Services applet

   D. Adapter in network applet

   E. Dial-up applet

2) You are installing NT and testing the monitor type and the screen goes black. When you reboot you are put back into the monitor type selection screen.
What is the problem?

   A. Refresh rate

   B. Resolution

   C. Monitor type

   D. Color depth

3) What two things do you need to print to a TCP/IP printer on a network?

   A. Hostname + IP-address

   B. Hostname + subnetmask

   C. IP-address + printername

   D. Printername + hostname

4) You install a tape backup device that uses the Enhanced IDE interface. In which dialog box from the control panel must you install the tape backup device driver?

   A. SCSI adapters

   B. Devices

   C. System Properties

   D. Tape Devices

5) Peter Smith wants to install Windows NT Workstation without user invention. He plans to do this by running winnt.exe with the /u switch.
Which additional file must he use ?

   A. Uniqueness database file (UDF).

   B. An unattended.txt file (answer file).

   C. A customized setup.sif file.

   D. A customized setup.inf file.

6) You want to send a document from your Windows NT workstation computer to a printer that is located on another Windows NT WS computer.
You want to do this without permanently installing drivers for that printer on your hard disk. What should you do?

   A. Use "net print" to send the document to the printer.

   B. Drag and drop the document file onto the printer in Windows NT explorer.

   C. Use Windows NT Explorer to temporarily capture the printer, and then send the document to the printer.

   D. Use the Add Printer Wizard to temporarily connect to the printer, and then send the document to the printer.

7) You wish a user to be able to view Event Viewer, how can you achieve this?

   a. You must share EVENTVWR.EXE to user

   b. Use system policy and give event wiever granted rights

   c. Only Administrators can view Event Viewer, so add user to Administrators group.

8) You are installing a MIDI device, which control panel applet do you use?

   a. FindFast

   b. Add new programs

   c. Add new hardware

   d. Multimedia

   e. Sounds

   f. System

9) How do you lock your workstation if you leave it for more than 30 minutes?

   a. Use CTRL+ALT+Del and click Lock Workstation

   b. Use Schedule And run Logoff

   c. Use password protected screen saver.

   d. Logoff for 30 seconds by using policy

10) After restarting Windows NT Workstation, monitors shows a blank blue screen without text and the computer stops responding. You discover that an incorrect driver was just installed.
What should you do to correct the problem?

   A. Call the manufacturer to request an NT compatible driver

   B. Use the Last Known Good Configuration to restart your system and correct the problem.

   C. Use the emergency repair disk

11) You notice excessive paging alert from system , how do you correct this?

   A. Add more RAM

   B. Add a second processor

   C. Increase the size of the paging file

   D. Decrease the size of the paging file

   E. Create a second paging file

12) You have an NT Workstation with TCP/IP installed and you want it to become an FTP server.
What protocol or service do you need?

   A. PWS (Peer Web Services)

   B. Simple TCP/IP Services

   c. DNS

   d. GSNW

   e. RIP

   F. IIS (Internet Information Services)

13) Which service translates URL to IP?

   a. Server

   b. DHCP

   c. WINS

   d. GSNW

   e. DNS

   f. Workstation

14) What does WINS do?

   a. Distributing Ýp configuration for client machine

   b. Translates Host names to IP addresses.

   c. Backup your system configuration.

   d. Translates NetBIOS names to IP addresses.

   e. Servicing Internet services

   f. Translates "host.domain" names to IP addresses.

   g. Acting File print sharing services

15) You want to set the boot delay time to 10 seconds. How should you proceed?

   A. Edit Boot.ini to set timeout to 10 seconds

   B. Use Control Panel | System Properties | Startup - Shutdown tab

   C. Use system properties

   D. Edit HKEY_CONFIG in the registry

16) You want to replace Windows 95 by Windows NT Workstation 4.0 on some user computers.
They all want to keep their Windows 95 desktop settings and all their applications.
How should you proceed?

   a. Run winnt32.exe and Install Windows Nt In \winnt directory

   b. Run winnt.exe and use upgrade switch (/up:95)

   c. Run Winnt.exe and Install Windows NT in the same directory as Windows

   d. Run setup exe and select upgrade installation in setup windows

   e. Run Winnt32.exe and install Windows NT in the same directory as Windows 95

   f. Can't be done. Because Windows 95 and Windows NT have different registry configurations.

17) Which utility do you use to record memory dump following an application failure?

   a. Dr. Watson

   b. Windows NT System properties setting

   c. Windows Explorer

18) You have a computer that dual boots from NT Workstation or MS-DOS using FAT in all partitions.
You decide to remove NT Workstation and use MS-DOS only.
What to do?

   a. Use Add/remove programs in control panel and remove windows nt

   b. Delete Program Files folder and sub folders.

   c. Boot from DOS, run SYS.COM, delete all NT Workstation files

   d. delete boot.ini file. Because it is showing windows nt installation path.

19) Your computer runs only Windows NT Workstation on an NTFS partition.
You would like to remove Windows NT and run MS-DOS.
How would you do it?

   a. Use convert.exe to convert the partitions to FAT, then run Sys.com

   b. Delete Program Files folder and sub folders.

   c. Boot from DOS, run SYS.COM, delete all NT Workstation files

   d. Use Rollback.exe to restore MS-DOS

   e. use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to reinstall MS-DOS

20) Your computer is running Windows NT 3.51 Workstation on an HPFS partition.
You would like to upgrade to Windows NT 4.0 Workstation.
How should you proceed?

   A. Run winnt.exe and install Windows NT 4.0 in the same directory

   B. Run winnt32.exe and install Windows NT 4.0 in the same directory

   C. Convert to NTFS, then upgrade to Windows NT 4.0

21) Your computer is setup to dual boot MS-DOS and Windows NT 4.0 Workstation.
When you select to boot MS-DOS from the boot menu, DOS doesn't start and you get an error message "No system disk error".
What do you suspect is the problem?

   A. The BOOT.INI file is corrupted

   B. The NTLDR file is corrupted or missing

   C. The BOOTSECT.DOS file is corrupted or missing

22) Which three files are required to run unattended installations?

   A. Unattend.txt

   B. UDF files

   C. Sysdiff.exe

   D. Winnt.exe

   E. Windiff.exe

23) Which tools do you use to search for a value in the registry?

   A. REGEDIT.EXE

   B. REGEDT32.EXE

   C. Registry Compiler

   D. REGEDIT32.EXE

   E. REGNT.EXE

24) You have an NT Workstation connected to 2 routers, you want the NT Workstation to be able to route.
Which of the following do you have to install?

   A. IP

   B. Subnetmask

   C. Default Gateway

   D. DHCP

25) You have an NT Workstation connected via Internet to an NT Server that has a DNS name of "sales.datum.com" and a printer with the name "reports".
How do you refer to the resource in order to map it?

   a. \\sales.datum.com\reports

   b. \datum.com\sales\report

   c. //sales.datum.com/reports

   d. \\sales.datum\report

   e. \\datuým.com\reports

26) Which 2 NT Workstation utilities are available for monitoring processor utilization?

   a. Performance Monitor

   b. Task Manager.

   c. System Ýnformation

   d. Network Monitor

   e. System Properties

   f. Display