1) RAS server with 3 modems and Multilink enabled. Administrator implements Callback Security on the server.
How does it work?

   A. RAS server recalls with three different telephone numbers.

   B. RAS server recalls with one telephone number.

   C. RAS server recalls with two telephone numbers only

   D. It doesn't work

2) Which of the following is used to search for the value of a key in the registry?

   A. regedit.exe

   B. regedt32.exe

   C. Poledit.exe

   D. System policy editor

3) After restarting Windows NT Workstation, monitors show a blank blue screen without text and the computer stops responding. You discover that an incorrect driver was just installed.
What should you do to correct the problem?

   A. Call the manufacturer to request an NT compatible driver

   B. Use the Last Known Good Configuration to restart your system and correct the problem.

   C. Use the emergency repair disk

4) You have an NT Workstation connected to 2 routers.
You want the NT Workstation to be able to route.
Which of the following do you have to install ?

   A. IP

   B. Subnetmask

   C. Default Gateway

   D. DHCP

5) What protocol/service do you need to send TCP/IP trap messages to another computer?

   A. SNMP

   B. Simple TCP/IP services

   C. NWlink

   D. Network monitor agent

   E. DHCP

6) One computer used by three users. They want their files securely and own their individual desktop setting. What THREE steps must you do for them?

   A. Create one account for each user

   B. Create one account for three user to share

   C. Create one profile for each user

   D. Create home directory for each user on NTFS partition.

   E. Create home directory for each user on FAT partition.

   F. Create home directory for each user on HPFS partition.

   G. Set permission to each user to let them exclusive access their own home directory.

7) There are 20 laptop computers and 50 desktop computers. You want to install NT workstation 4.0 and five applications on them.
Required: Auto install NT

Optional: Auto install applications
-Join them to domain CORP

Solution:
-Create one SETUP.INF.
-Create UDF file for them.
-Install one computer with NT. Run Sysdiff.exe /snap. Install five
applications. Run Sysdiff.exe /diff to create diff file.
-Install all the other computers with the Unattended.txt file.
Use Sysdiff.exe /apply to auto install applications.
Which results does the proposed solution produce?

   a. Solution meets the required and all the optional.

   b. Solution meets the required and only one the optional.

   c. Solution meets the required and no optional.

   d. Solution does not meet the required.

8) One Lan that has both novell and NT servers.
One workstation running NT 4 -
What two protocols do you need to install so that the workstation can use the resources on both servers?

   a. TCP/IP

   b. Nwlink

   c. CSNW

   d. GSNW

9) Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files for other computers in the same LAN.
You have there a SCSI controller with 4 disks of 2 GB each.

Required result: To optimise performance for optimum speed of access to local data files.

Optional results: Reconfigure for optimum speed of access to paging file.
Optimise network access performance.

Proposed solution: Configure the first hard disk as boot partition.
Configure the other 3 disks as a strip Set. Use NTFS on all partitions.
Place data on the strip Set. Place paging file strip Set.
Configure order of protocols at bottom
Which results does the proposed solution produce?

   A. The required result and 2 of the optional results.

   B. The required result and 1 of the optional results.

   C. The required result and none of the optional results.

   D. None of the required results.

10) The printing job of Invoices is sent to a printer and it jams in between. The program will not allow to re-submit the job to the printer. What you will do to rectify this problem?

   A) Select resume from document menu

   B) Select restart from document menu

   C) Select cancel from document menu and then restart

   D) Select refresh from view menu and then resume

11) You want to automate the installation of 20 laptops and 50 PCs.

Required: Automate the installation of applications on 70 computers

Optional:
Automate installation standard suit of win32 based application
You want to configure all computers to join CORP domain during installation

Solution.
-2 answer files, 1 UDF, use Windiff

Which results does the proposed solution produce?

   A. The required result and 2 of the optional results.

   B. The required result and 1 of the optional results.

   C. The required result and none of the optional results.

   D. None of the required results

12) You want to automate the installation of 20 laptops and 50 PCs.

Required: - Automate the installation

Optional: - Automate installation of apps. Make it join a domain during installation

Solution.
Create an unattend file with the appropriate lines included to join the workgroup for both platforms.
Create a udf file. Use sysdiff to make a difference file. Apply the difference file.
Which results does the proposed solution produce?

   A. The required result and 2 of the optional results. [

   B. The required result and 1 of the optional results.

   C. The required result and none of the optional results.

   D. None of the required results

13) You need to install Windows NT Workstation on 35 identical new laptop computers and on 55 identical new desktop computers.
They will all be members of a domain named SALES.

Required Result:
You must automate the installation of Windows NT Workstation on the computers.

Optional Desired Results:
You want all of the computers to join the SALES domain during the installation process.
You want to automate the installation of a standard suite of applications on all the computers.

Proposed Solution:
Create one Setup.inf file to be used for all computers.
Create one Uniqueness Database file(UDF) that contains the unique hardware configuration options for each computer.
Install Windows NT Workstation on one computer.
Use Sysdiff.exe to take a snapshot of the system, install the suite of applications on this computer, and then use sysdiff.exe again to create a difference file.
Automate the installation of NT Workstation on all of the other computers by using the Unattend.txt file and the appropriate portions of the UDF.
Automate the installation of the suite of applications on all of the other computers by using Sysdiff.exe and the difference file that was created earlier.
Which results does the proposed solution produce?

   A. The proposed solution does not produce the required result.

   B. The proposed solution produces the required result and both of the optional desired result.

   C. The proposed solution produces the required result and only one of the optional desired result

   D. The proposed solution produces the required result but does not produce either of the optional desired result.

14) You are installing Windows NT from a CD-ROM. You get the following message "copysinglefile, non-critical error, could not copy file"
What could be the problem?

   A. Your disk is full

   B. The CD-ROM is not on the HCL list

   C. The file already exists

15) Your NT Workstation 3.51 computer has a 33 MHZ, 386 processor and 16 Megabytes of RAM.
You want to upgrade the computer to NT Workstation 4.0, and you want all of the application settings to be the same in Windows NT Workstation 4.0 as they were in Windows NT Workstation 3.51.

How should you install Windows NT Workstation 4.0?

   A. Install NT Workstation 4.0 in the same directory and choose the Upgrade option, then backup all data files. Repartition and format the hard disk, and then install NT Workstation and all applications. Customise the user's profile settings and restore all data files.

   B. You cannot successfully upgrade this computer to Windows NT Workstation 4.0.

   C. Install NT Workstation 4.0 in a different directory than Windows NT Workstation 3.51. Manually reinstall all applications and recreate all of the user's profile settings.

   D. Install NT Workstation 4.0 in a different directory than Windows NT Workstation 3.51. Use convert.exe to migrate all of the application settings and users profile settings to NT WS 4.0

16) You want to set the boot delay time to 10 seconds. How should you proceed?

   A. Edit Boot.ini to set timeout to 10 seconds

   B. Use Control Panel | System Properties | Startup - Shutdown tab

   C. Use config.sys file

   D. Edit HKEY_CONFIG in the registry

17) Choose two utilities to monitor processor activity

   A. Windows NT Diagnostics

   B. Event Viewer

   C. Task Manager

   D. Performance Monitor

18) Configuring Dial Up Networking (DUN) to connect to an ISP. How to establish an IP address for your machine?

   A. The account will use your default IP address already established

   B. Connect to ISP's PPP server and request an IP address

   C. Configure the IP address in the phonebook entry of the DUN configuration

19) You want to allow your windows NT workstation computer to resolve Unix host names to IP addresses on your corporate intranetwork.
Which TCP/IP option should you configure?

   A. Scope ID

   B. default gateway

   C. The IP address of DNS server address

   D. BOOTP server address

20) Most of the client workstations use NetBEUI protocol to communicate with Server.
You want to increase the network performance.
Where the binding order would you change?

   A. In Server in >>>>Network->Binding->Server->NetBEUI on the top

   B. In Server in>>>>Network->Binding->Workstation->NetBEUI on the top

   C. In Workstation in>>>>>Network->Binding->Server->NetBEUI on the top.

   D. In Workstation in>>>>Network->Binding->Workstation->NetBEUI on the bottom

21) DAVIDL is a member of users group and wants to share a FAT folder from his machine running NTW.
How he can share it, so that Everyone special group will get read permission to that folder?

   A. Login as Administrator, go to Windows NT Explorer, right click the folder, share it & assign the permission

   B. Login as DAVIDL, go to Windows NT Explorer, right click the folder, share it & assign the permission.

   C. Login as DAVIDL and use User Manager .to change the share permission's

22) Your computer is member of a workgroup. You want to map a network drive to a share on a server PDC in the XYZ domain.
The server has had the guest account disabled. How?

   A. Log on to your workstation using your domain user account

   B. Log on to your workstation using the account of a domain member

   C. In the log on box choose the domain name

   D. In the map network drive box in explorer choose "log on using account" option

   E. In the map network drive box in explorer choose "connect as" option

23) NT Workstation - member of workgroup RESEARCH. You want to map a network drive on your computer to a NT Server in the CORP domain.
The Guest account is disabled in the CORP domain. How would you do it?

   A. Log onto NT Workstation computer with username from the CORP domain

   B. Log onto NT Workstation computer with the same username you would use to access the NT Server computer

   C. Select CORP from the Domain drop-down list box in the logon info dialog box

   D. Select Connect As in map network drive and enter the username of an account in the CORP domain

24) Setting up a replication account and you attempt to log on afterwards and an error appears and you are not allowed to log on. why ?

   A. You don't have permission to log on as a service.

   B. You are not the Administrator.

   C. You are not in the server operators group.

   D. You failed to change the password.

25) What happens when you run 16-bit windows based application in its own memory space?

   A. Application runs at higher priority

   B. Application can be preemptively multitasked

   C. Application uses less system memory

   D. Application cannot interfere with execution of other 16-bit windows based apps running at the same time.

26) You install a 32-bit application that is designed for Windows NT Workstation4.0.
This application will use your computer modem.
What can you use to configure the modem so that it can be used by the new application?

   A. the Add/Remove programs properties dialog box from Control Panel.

   B. From the modems properties dialog box from control panel

   C. the Dialing properties dialog box from control panel

   D. the Adaptors page of the network dialog box from Control Panel

27) Situation (Long): You are planing to reconfigure an NT Workstation with 32 MB RAM for optimum speed of access to its local (mainly graphic data) files for other computers in the same LAN.
You have there a SCSI controller with 4 disks of 2 GB each.

Required result:
To optimise performance for optimum speed of access to local data files.

Optional results:
Reconfigure for optimum speed of access to paging file.
Optimise network access performance

Proposed solution
Configure the first hard disk as boot partition. Configure the other 3 disks as a Volume Set.
Use FAT on all partitions. Place data on the Volume Set. Place paging file on the boot partition.
Configure binding order of protocols so that most used protocols are at the bottom of the binding order.
Which results does the proposed solution produce?

   A. The required result and 2 of the optional results.

   B. The required result and 1 of the optional results.

   C. The required result and none of the optional results.

   D. None of the required results.

28) Your network has 15 workstations and one Windows NT Server computer that is configured as a Primary Domain Controller (PDC).
Five of the workstations run Windows NT Workstation and 10 of them run Windows 95.
You plan to install a new Intel-based computer on your network.
DonaldT, the company president will use it, and other employees will use it when he is not using it.
You need to plan for security and choose an operating system for the new computer.

Required Result:
Allow DonaldT to secure files and directories on the new computer so that other users can access only the files and directories to which DonaldT has assigned rights to those users.

Optional Desired Results:
Allow users other than DonaldT to manage security on only files and directories they have created.
Allow DonaldT to control access to the new computer's files, directories and shares by using user accounts and group accounts from the domain.

Proposed Solution:
Install Windows NT Workstation on the new computer and configure it to be in a workgroup named EXEC.
Configure the new computer to use NTFS.
Rename the administrator account to DonaldT.
Remove all users and groups other than DonaldT from the Administrators local group on the new computer.

Which results does the proposed solution produce?

   A. The required result and 2 of the optional results.

   B. The required result and 1 of the optional results.

   C. The required result and none of the optional results.

   D. None of the required results

29) You are installing NT and testing the monitor type and the screen goes black. When you reboot you are put back into the monitor type selection screen.
What is the problem?

   A. Refresh rate

   B. Resolution

   C. Monitor type

   D. Color depth

30) How should you use an unattended.txt file (answer file) during the automated installation of a Windows NT Workstation on 100 identical new computers?

   A. To provide hardware-specific configuration information and other configuration data for the computers.

   B. To provide user account information, a unique computer name, and a unique identifier specific to each computer.

   C. To automate installation of applications on the computers during the installation of WinNT WS.

   D. To place application specific registry data into the registry on each computer including serialisation and registration data.

31) You install a tape backup device that uses the Enhanced IDE interface.
In which dialog box from the control panel must you install the tape backup device driver?

   A. SCSI adaptors

   B. Devices

   C. System Properties

   D. Tape Devices

32) Peter Smith wants to install Windows NT Workstation without user invention. He plans to do this by running winnt.exe with the " /u " switch.
Which additional file must he use?

   A. Uniqueness database file (UDF).

   B. An unattended.txt file (answer file).

   C. A customised setup.sif file.

   D. A customised Setup.inf file.

33) You suspect that someone is gaining unauthorised access to the computers on your network. You enable auditing of user login events.
When you look at the Eventviewer security log three days later, you see that every account has more than 100 failed logon attempts before each successful logon.
You also note that all the logon attempts on each account occurred within one minute. You want to prevent further unauthorised logons.
What must you do in the Account Policy dialog box?

   A. Select the Account lockout radio button.

   B. Set a value in the spin control in the Maximum Password Age group.

   C. Set a value in the spin control in the Minimum Password Age group.

   D. Set the spin box control in the Password Uniqueness group to remember the 10 last passwords.

34) You notice excessive paging, how do you correct this?

   A. Add more RAM

   B. Add a second processor

   C. Increase the size of the paging file

   D. Decrease the size of the paging file

   E. Create a second paging file

35) You want to replace Windows 95 by Windows NT Workstation 4.0 on some user's computers. They all want to keep their Windows 95 desktop settings and all their applications.
How should you proceed?

   A. Run Winnt.exe and Install Windows NT in the same directory as Windows 95

   B. Run Winnt32.exe and install Windows NT in the same directory as Windows 95

   C. Run Winnt.exe and install Windows NT in a separate directory, reinstall all the applications and reconfigure user environment under Windows NT, then remove Windows 95

   D. Can't be done because Windows 95 and Windows NT have different registry configurations.

36) Your computer runs only Windows NT Workstation on an NTFS partition. You would like to remove Windows NT and run MS-DOS.
How would you do it?

   A. Run Sys.com

   B. Use convert.exe to convert the partitions to FAT, then run Sys.com

   C. Use Rollback.exe to restore MS-DOS

   D. use fdisk.exe to remove all the partitions, then use the MS-DOS setup disks to reinstall MS-DOS

37) You have to administer 90 NT Workstations. Accounts are maintained by a PDC that is the only server on the network.
Users log on using accounts from the domain.
You want to implement restrictions on the NT Workstations so that the "Shut Down" option is disabled in the login dialog box. Least administrative effort.
How?

   A. Use a Logon policy

   B. Change the registry value of Shut Down Without Logon from 1 to 0.

   C. Use System properties

   D. Use Logon Script

38) You have started a Win16 application (APP1) in a separate memory space. Later you start another Win16 application (APP2) and an MS-DOS application (DOS1). APP2 hangs and stops responding.
How does this affect the APP1 and DOS1 applications?

   A. APP1 and DOS1 are not affected and will continue running normally.

   B. APP1 will stop responding but DOS1 will continue running normally.

   C. DOS1 will stop responding but APP1 will continue running normally.

   D. APP1 and DOS1 will stop responding.

39) You are running several small applications simultaneously on your Windows NT Workstation. One of the Win16 based applications stops responding.
How can you shut down this application without affecting all of the other Win16 or Win32 based applications?

   A. Do nothing. NT automatically purges unresponsive apps from the system.

   B. You can't. Faulty Win-16 based apps hang the system. The computer must be restarted.

   C. From Task Manager, select the application that is not responding and click End Task.

   D. From Task Manager, select all of the pertinent processes and end them.

40) Under Windows NT, network adaptor card drivers must be _____ compliant in order to be bound independently to several protocols.

   A. NDIS

   B. ODI

   C. NE 2000

   D. TDI

41) NWlink is a protocol that is compatible with the _________ protocol.

   A. NetBEUI

   B. IPX/SPX

   C. LAT

   D. NCP

42) When you send a print job to a network-printing device, it comes out illegibly. What is the most likely cause of the problem?

   A. Incorrect print driver.

   B. Incorrect network protocol.

   C. The spooler service is malfunctioning.

   D. Incorrect paper size.

43) A user complains that whenever he sends a print job his hard disk starts crashing and never reaches the server. What is the likely cause of the problem?

   A. The spooler service on the server is stuck.

   B. There is not enough disk space in the print server.

   C. There is not enough disk space for spooling.

   D. The workstation is out of RAM.

44) In Windows NT terminology, what is the physical device that prints a document?

   A. Print device.

   B. Printer.

   C. Print processor.

   D. Print pool.

45) You plan to install Windows NT Workstation on all the client machines of your network.
However, the information technology department is concerned about the licensing strategy for the workstations when connecting to all three of the company's NT Server computers.
What is the most appropriate licensing mode?

   A. Per server licensing.

   B. Windows NT Workstation does not require licensing.

   C. Per seat licensing.

   D. A combination of per server and per seat licensing.

46) You want to send a print job to a UNIX workstation running TCP/IP. What service must you install in your Workstation computer?

   A. Install CSNW on your workstation.

   B. TCP/IP printing.

   C. DLC.

   D. File and print services for UNIX.

47) You notice that there is too much paging occurring, and also the % processor usage is constantly 92%.
What do you do for the best improvement in performance?

   A. Add a second processor

   B. Add more RAM

   C. Create a second paging file

   D. Increase the size of the paging file

48) What is the unattend.txt file used for?

   A. Automatic installation of application

   B. Storage of system specific unique information such as computer name etc.

   C. Information about hardware configurations,installation path, etc.